Parameters:

1. Forming method: wire cutting; fastest working times: cutting 100 times/min

2. Biscuit weight deviation: ±4% (each 5 biscuit weighing); pass rate: 98%

3. Production speed: Determined according to the furnace length and baking time of the production line

4. Energy requirements: Determined according to customer needs (generally 380V/50Hz), total power: about 4KW

5. Dimensions: 1200*2200*1900 

6. Feeding by a feed pump, precise control, small deviation of biscuit weight;

7. The feeding trough roller, feed pump and cutting are driven by servo motors, which are controlled independently

8. The parameters such as the speed of the grooved roller, the feeding speed of the material pump and the cutting speed are controlled by the touch screen, which is easy to operate

9. The material pump assembly adopts the worm gear clamping method, which is convenient for disassembly, cleaning and replacement, and simple operation

10. The cutting die assembly is clamped by an eccentric wheel, which is convenient for disassembly, cleaning and replacement, and simple operation

11. The cutting assembly adopts a cam linkage mechanism, and the action is stable

12. Equipped with a mold trolley to assist in changing molds, which is convenient for removing the material pump assembly and cutting mold assembly for cleaning

13. The height between the belt and the mold can be adjusted conveniently and quickly by the handle, so that the biscuits can fall on the conveyor belt smoothly and neatly after being cut.

14. The surface of the main structural parts are plated with hard chrome treatment, which is not easy to rust

15. The side board is made of Q235 carbon steel, the thickness is 20mm after processing, and the surface is plated with hard chrome

16. The side plate, connecting plate and cutting arm of the machine head are made of 7050 aluminum alloy, and the surface is treated with Teflon

17. The pump teeth are made of imported food grade nylon material; the pump body material is made of 7075 aluminum alloy, and the surface is treated with Teflon

18. The cutting runner plate uses 7050 aluminum alloy, and the surface is treated with Teflon

19. The cutting mold uses imported food grade POM materials

20. The enclosure, pallet and hopper are made of SUS304 stainless steel

21. Feeding trough roll straight through: Ø133, the material is made of SUS304 stainless

steel

22. This machine uses 3 sets of servos; the servo motor uses Schneider, and the reducer uses Taiwan brand precision planetary helical gear reducer

23. Control appliances mainly use well-known brands: Schneider/Siemens/AB

24. Bearings use Japanese brand: NSK

25. Adopt food grade silicone sealing ring