Availability: | |
---|---|
Quantity: | |
EZ
SINOBAKE
8438100090
Parameter:
1. Roll diameter: Ø300, the surface is treated with special anti-rust and anti-sticking treatment, surface hardness: HRC58-62
2. Working width: 980mm/1000mm/1020mm (1180mm/1200mm/1220mm), electric adjustment of the thickness of the dough
3. Dimensions: 800X2130X1450 (800X2330X1450)
4. The side board is made of Q235 carbon steel, the thickness is 28mm after processing, the surface is plated with hard chrome, and the surface hardness is HRC58-62
5. The conveyor frame board uses Q235 carbon steel material, the thickness after processing is 15mm, the surface is plated with hard chrome, and the hardness is HRC58-62
6. The pallet uses 304 stainless steel
7. The roller and the conveyor belt are controlled by independent motors, which is easy to adjust
8. Conveying active roller diameter: Ø160, surface covered with rubber, rubber material is non-toxic and oil-resistant material
9. The conveyor belt uses European imported PU belt with a thickness of 1.3mm
10. The conveyor belt is pneumatically tensioned and the anti-deflection guide is used to prevent deviation, and the cylinder is made of Korean famous brand;
11. The scraper uses a 2mm thick blade, which is clean, durable, and does not damage the roll.
12. The enclosure is made of 1.5mm304 stainless steel, and the front and rear enclosures are supported by pneumatic support rods
13. The surface of roller, transition knife, etc. are plated with hard chrome
14. Transition method: roller flat transition
15. The main drive adopts chain drive
16. Europe brand for main motor and reducer, frequency conversion speed regulation
17. Roll gap is detected by displacement sensor, accurate digital display, speed and thickness touch screen control
18. Adopt no sanitary dead angle structure design, safe and sanitary
19. Install safety protection devices such as emergency stop switches
20. The line layout is neat and beautiful, and the wire trough uses aluminum alloy (when equipped with a production line)
21. Control appliances mainly use French brand
22. Bearings use Japanese brand
Parameter:
1. Roll diameter: Ø300, the surface is treated with special anti-rust and anti-sticking treatment, surface hardness: HRC58-62
2. Working width: 980mm/1000mm/1020mm (1180mm/1200mm/1220mm), electric adjustment of the thickness of the dough
3. Dimensions: 800X2130X1450 (800X2330X1450)
4. The side board is made of Q235 carbon steel, the thickness is 28mm after processing, the surface is plated with hard chrome, and the surface hardness is HRC58-62
5. The conveyor frame board uses Q235 carbon steel material, the thickness after processing is 15mm, the surface is plated with hard chrome, and the hardness is HRC58-62
6. The pallet uses 304 stainless steel
7. The roller and the conveyor belt are controlled by independent motors, which is easy to adjust
8. Conveying active roller diameter: Ø160, surface covered with rubber, rubber material is non-toxic and oil-resistant material
9. The conveyor belt uses European imported PU belt with a thickness of 1.3mm
10. The conveyor belt is pneumatically tensioned and the anti-deflection guide is used to prevent deviation, and the cylinder is made of Korean famous brand;
11. The scraper uses a 2mm thick blade, which is clean, durable, and does not damage the roll.
12. The enclosure is made of 1.5mm304 stainless steel, and the front and rear enclosures are supported by pneumatic support rods
13. The surface of roller, transition knife, etc. are plated with hard chrome
14. Transition method: roller flat transition
15. The main drive adopts chain drive
16. Europe brand for main motor and reducer, frequency conversion speed regulation
17. Roll gap is detected by displacement sensor, accurate digital display, speed and thickness touch screen control
18. Adopt no sanitary dead angle structure design, safe and sanitary
19. Install safety protection devices such as emergency stop switches
20. The line layout is neat and beautiful, and the wire trough uses aluminum alloy (when equipped with a production line)
21. Control appliances mainly use French brand
22. Bearings use Japanese brand