Laminator

Parameter:

1. Lamination method: cut-off lamination, number of lamination layers: 8-12 layers

2. Cut-off method: electric, the cut-off position is tracked by an electric eye

3. Feeding and calendering twice

4. Feeding trough roll diameter: Ø400, the surface is rust-proof,

Special treatment such as anti-sticking, surface hardness: HRC58-62

5. Roll diameter: Ø300, the surface is rust-proof,

Special treatment such as anti-sticking, surface hardness: HRC58-62

6. Rolling surface width: 600, lamination width: 950mm (1150mm), electric adjustment of surface thickness

7. Dimensions: 3350X1650X2300 (3550X1650X2300), weight: 6T (6.5T),

power : 10KW

8. The side board is made of Q235 carbon steel, and the thickness after processing is 28mm,

The surface is plated with hard chrome, the surface hardness is HRC58-62

9. The conveyor frame plate uses Q235 carbon steel material, the thickness after processing is 15mm,

The surface is plated with hard chrome, the hardness is HRC58-62

10. The pallet uses 304 stainless steel

11. The roller and the conveyor belt are controlled by independent motors, which is easy to adjust

12. The diameter of the conveyor driving roller is Ø160, the surface is covered with rubber, and the rubber material is non-toxic and oil-resistant material

13. The conveyor belt uses European imported PU belt with a thickness of 1.3mm

14. The conveyor belt adopts pneumatic tensioning and uses anti-deflection guide bars to prevent deviation, and the cylinder uses Korean famous brand;

15. The scraper uses a 2mm thick blade, which has the characteristics of cleaning up and not hurting the roll

16. The enclosure uses 1.5mm304 stainless steel material

17. The surface of roller, transition knife, etc. are plated with hard chrome

18. Transition mode: roller flat transition

19. The main drive adopts chain drive

20. Adopt no sanitary dead angle structure design, safe and sanitary

21. Install safety protection devices such as emergency stop switches

22. SEW/Siemens for main motor and reducer, frequency conversion speed regulation,

23. Roll gap is detected by displacement sensor, accurate digital display, speed and thickness touch screen control

24. The line layout is neat and beautiful, and the wire trough uses aluminum alloy (when equipped with a production line)

25. Control appliances mainly use French brand

26. Bearings use Japanese brand