SINOBAKE Direct Factory Price Rotary Cutter For Hard Biscuit Production Line

Parameter:

1. Diameter of the mold: Ø260, the roller body is made of 45 high-quality carbon steel, hard chromium plating treatment for high efficiency and rust prevention, the roller body length is 1530mm

2. Rubber roller diameter: Ø300, encapsulation thickness 20mm, rubber material is non-toxic and oil-resistant material, hardness is A60;

3. Working width: 1500mm

4. Dimensions: 950X2700X1350 Weight: 2.8(T)

5. The side board is made of Q235 carbon steel, the thickness is 32mm after processing, the surface is plated with hard chrome, and the surface hardness is HRC58-62

6. The conveyor frame board uses Q235 carbon steel material, the thickness after processing is 15mm, the surface is plated with hard chrome, and the hardness is HRC58-62

7. The pallet uses 304 stainless steel

8. Mould and conveyor belt are controlled by independent motors, easy to adjust

9. Conveying active roller diameter: Ø160, surface covered with rubber, rubber material is non-toxic and oil-resistant material

10. Equipped with mold lifting device

11. The conveyor belt uses the special belt of the roller cutting machine, adopts pneumatic tensioning and pneumatic deviation adjustment, and the cylinder adopts the Korean famous brand YSC;

12. Mould synchronization adjustment adopts electric adjustment, digital display synchronization

13. The enclosure uses 1.5mm304 stainless steel material, and the upper part uses a stainless steel tube protective cover

14. The surface of rollers, transition knives, etc. are plated with hard chrome

15. Transition method: small roller flat transition

16. SEW/Siemens for main motor and reducer, frequency conversion speed regulation

17. Mould pressure is detected by displacement sensor, accurate digital display, speed and gap touch screen control

18. Adopt no sanitary dead angle structure design, safe and sanitary

19. Install safety protection devices such as emergency stop switches

20. The line layout is neat and beautiful, and the wire trough uses aluminum alloy (when equipped with a production line)

21. Control appliances mainly use French brands: Schneider

22. Bearings use Japanese brand: NSK